|  |
Illinois Compiled Statutes
Information maintained by the Legislative Reference Bureau Updating the database of the Illinois Compiled Statutes (ILCS) is an ongoing process. Recent laws may not yet be included in the ILCS database, but they are found on this site as Public Acts soon after they become law. For information concerning the relationship between statutes and Public Acts, refer to the Guide. Because the statute database is maintained primarily for legislative drafting purposes, statutory changes are sometimes included in the statute database before they take effect. If the source note at the end of a Section of the statutes includes a Public Act that has not yet taken effect, the version of the law that is currently in effect may have already been removed from the database and you should refer to that Public Act to see the changes made to the current law.
BUSINESS TRANSACTIONS
(815 ILCS 325/) Recyclable Metal Purchase Registration Law. 815 ILCS 325/1
(815 ILCS 325/1) (from Ch. 121 1/2, par. 321)
Sec. 1. Short title. This Act may be cited as the Recyclable Metal Purchase Registration
Law.
(Source: P.A. 95-979, eff. 1-2-09.)
|
815 ILCS 325/2 (815 ILCS 325/2) (from Ch. 121 1/2, par. 322)
(Text of Section before amendment by P.A. 103-677)
Sec. 2. Definitions. When used in this Act:
"Recyclable metal" means any copper, brass, or aluminum, or any combination of those metals, or any catalytic converter or its contents purchased by a recyclable metal dealer, irrespective of form or quantity,
except that "recyclable metal" does not include: (i) items designed to contain, or to be used in the preparation of, beverages or food for human consumption; (ii) discarded items
of non-commercial or household waste; (iii) gold, silver, platinum, and other precious metals used in jewelry; or (iv) vehicles, junk vehicles, vehicle cowls, or essential vehicle parts.
"Recyclable metal dealer" means any individual, firm, corporation or partnership conducting activity within the boundaries of the State of Illinois and
engaged in the business of purchasing and reselling recyclable metal either at a
permanently established place of business or in connection with a business
of an itinerant nature, including junk shops, junk yards, or junk stores, except that "recyclable metal dealer" does not include automotive parts recyclers, scrap processors, repairers and rebuilders licensed pursuant to Section 5-301 of the Illinois Vehicle Code. Recyclable metal dealers shall not be engaged in the business of purchasing or reselling vehicles, junk vehicles, vehicle cowls, or essential vehicle parts.
(Source: P.A. 102-906, eff. 5-27-22.)
(Text of Section after amendment by P.A. 103-677) Sec. 2. Definitions. When used in this Act: "Catalytic converter" means a post-combustion device that oxidizes hydrocarbons and carbon monoxide gases or reduces oxides of nitrogen and that is designed or intended for use as part of an emission control system. As used in this Section, "catalytic converter" includes nonferrous parts, including rhodium, platinum, and palladium. "Detached catalytic converter" means a catalytic converter that was previously installed on a motor vehicle and subsequently removed. "Recyclable metal" means any copper, brass, or aluminum, or any combination of those metals, or any catalytic converter or its contents purchased by a recyclable metal dealer, irrespective of form or quantity, except that "recyclable metal" does not include: (i) items designed to contain, or to be used in the preparation of, beverages or food for human consumption; (ii) discarded items of non-commercial or household waste; (iii) gold, silver, platinum, and other precious metals used in jewelry; or (iv) vehicles, junk vehicles, vehicle cowls, or essential vehicle parts. "Recyclable metal dealer" means any individual, firm, corporation or partnership conducting activity within the boundaries of the State of Illinois and engaged in the business of purchasing and reselling recyclable metal either at a permanently established place of business or in connection with a business of an itinerant nature, including junk shops, junk yards, or junk stores, except that "recyclable metal dealer" does not include automotive parts recyclers, scrap processors, repairers and rebuilders licensed pursuant to Section 5-301 of the Illinois Vehicle Code. Recyclable metal dealers shall not be engaged in the business of purchasing or reselling vehicles, junk vehicles, vehicle cowls, or essential vehicle parts.(Source: P.A. 102-906, eff. 5-27-22; 103-677, eff. 1-1-25.) |
815 ILCS 325/3 (815 ILCS 325/3) (from Ch. 121 1/2, par. 323)
(Text of Section before amendment by P.A. 103-677)
Sec. 3. Records of purchases. Except as provided in Section 5 of this Act every recyclable metal dealer in this
State shall enter into an electronic record-keeping system for each
purchase of recyclable metal, a catalytic converter or its contents, or recyclable metal containing copper the following
information:
1. The name and address of the recyclable metal | |
2. The date and place of each purchase;
3. The name, address, and copy of the license as an
| | automotive parts recycler or scrap processor issued by the Secretary of State of the person or persons from whom the recyclable metal was purchased, which shall be verified from a valid driver's license or other government-issued photo identification. The recyclable metal dealer shall make and record a photocopy or electronic scan of the license as an automotive parts recycler or scrap processor issued by the Secretary of State and driver's license or other government-issued photo identification. If the person delivering the recyclable metal does not have a valid driver's license or other government-issued photo identification, the recyclable metal dealer shall not complete the transaction;
|
|
4. The motor vehicle license number and state of
| | issuance of the motor vehicle license number of the vehicle or conveyance on which the recyclable metal was delivered to the recyclable metal dealer;
|
|
5. A description of the recyclable metal purchased,
| | including the weight and whether it consists of bars, cable, ingots, rods, tubing, wire, wire scraps, clamps, connectors, other appurtenances, or some combination thereof;
|
|
6. Photographs or video, or both, of the seller and
| | of the materials as presented on the scale; and
|
| 7. A declaration signed and dated by the person or
| | persons from whom the recyclable metal was purchased which states the following:
|
| "I, the undersigned, affirm under penalty of law
| | that the property that is subject to this transaction is not to the best of my knowledge stolen property.".
|
| A copy of the recorded information shall be kept in an electronic record-keeping system by the recyclable metal dealer. Purchase records shall be retained for a period of 3 years. Photographs shall be retained for a period of 3 months and video recordings shall be retained for a period of one month. The electronic record-keeping system shall be made available for inspection by any
law enforcement official or the representatives of common carriers and
persons, firms, corporations or municipal corporations engaged in either
the generation, transmission or distribution of electric energy or engaged
in telephone, telegraph or other communications, at any time. A recyclable metal dealer must complete and file a 1099-MISC on behalf of the seller, unless the seller has a current license as an automotive parts recycler or scrap processor issued by the Secretary of State.
(Source: P.A. 102-906, eff. 5-27-22.)
(Text of Section after amendment by P.A. 103-677)
Sec. 3. Records of purchases. Except as provided in Section 5 of this Act every recyclable metal dealer in this State shall enter into an electronic record-keeping system for each purchase of recyclable metal, a catalytic converter or its contents, or recyclable metal containing copper the following information:
1. The name and address of the recyclable metal
| | 2. The date and place of each purchase;
3. The name, address, and copy of the license as an
| | automotive parts recycler or scrap processor issued by the Secretary of State of the person or persons from whom the recyclable metal was purchased, which shall be verified from a valid driver's license or other government-issued photo identification. The recyclable metal dealer shall make and record a photocopy or electronic scan of the license as an automotive parts recycler or scrap processor issued by the Secretary of State and driver's license or other government-issued photo identification. If the person delivering the recyclable metal does not have a valid driver's license or other government-issued photo identification, the recyclable metal dealer shall not complete the transaction;
|
| 4. The motor vehicle license number and state of
| | issuance of the motor vehicle license number of the vehicle or conveyance on which the recyclable metal was delivered to the recyclable metal dealer;
|
| 5. A description of the recyclable metal purchased,
| | including the weight and whether it consists of bars, cable, ingots, rods, tubing, wire, wire scraps, clamps, connectors, other appurtenances, or some combination thereof, and, in a transaction involving a catalytic converter, the vehicle identification number of the vehicle from which the catalytic converter was removed and any numbers, bar codes, stickers, or other unique markings of the catalytic converter that was removed;
|
| 6. Photographs or video, or both, of the seller and
| | of the materials as presented on the scale;
|
| 7. A declaration signed and dated by the person or
| | persons from whom the recyclable metal was purchased which states the following:
|
| "I, the undersigned, affirm under penalty of law
| | that the property that is subject to this transaction is not to the best of my knowledge stolen property."; and
|
| 8. A copy of the certificate of title or uniform
| | invoice showing the seller's ownership in the vehicle in the case of a transaction involving a catalytic converter.
|
| A copy of the recorded information shall be kept in an electronic record-keeping system by the recyclable metal dealer. Purchase records shall be retained for a period of 3 years. Photographs shall be retained for a period of 3 months and video recordings shall be retained for a period of one month. The electronic record-keeping system shall be made available for inspection by any law enforcement official or the representatives of common carriers and persons, firms, corporations or municipal corporations engaged in either the generation, transmission or distribution of electric energy or engaged in telephone, telegraph or other communications, at any time. A recyclable metal dealer must complete and file a 1099-MISC on behalf of the seller, unless the seller has a current license as an automotive parts recycler or scrap processor issued by the Secretary of State.
(Source: P.A. 102-906, eff. 5-27-22; 103-677, eff. 1-1-25.)
|
815 ILCS 325/4
(815 ILCS 325/4)
Sec. 4. (Repealed).
(Source: P.A. 76-1476. Repealed by P.A. 94-181, eff. 1-1-06.)
|
815 ILCS 325/4.1 (815 ILCS 325/4.1) (Text of Section before amendment by P.A. 103-677) Sec. 4.1. Restricted purchases. (a) It is a violation of this Act for any person to possess, purchase, attempt to purchase, sell or attempt to sell, or for any recyclable metal dealer to purchase or attempt to purchase, any of the following: (1) materials that are clearly marked as property | | belonging to a business or someone else other than the seller;
|
| (2) property associated with use by governments,
| | utilities, or railroads including, but not limited to, guardrails, manhole covers, electric transmission and distribution equipment, including transformers, grounding straps, wires or poles, historical markers, street signs, traffic signs, sewer grates, or any rail, switch component, spike, angle bar, tie plate, or bolt of the type used in constructing railroad track;
|
| (3) cemetery plaques or ornaments; or
(4) any catalytic converter or its contents not
| | attached to a motor vehicle at the time of the transaction unless the seller is licensed as an automotive parts recycler or scrap processor.
|
| (b) This Section shall not apply when the seller produces written documentation reasonably demonstrating that the seller is the owner of the recyclable metal material or is authorized to sell the material on behalf of the owner. The recyclable metal dealer shall copy any such documentation and maintain it along with the purchase record required by Section 3 of this Act.
(Source: P.A. 102-906, eff. 5-27-22.)
(Text of Section after amendment by P.A. 103-677)
Sec. 4.1. Restricted purchases.
(a) It is a violation of this Act for any person to possess, purchase, attempt to purchase, sell or attempt to sell, or for any recyclable metal dealer to purchase or attempt to purchase, any of the following:
(1) materials that are clearly marked as property
| | belonging to a business or someone else other than the seller;
|
| (2) property associated with use by governments,
| | utilities, or railroads including, but not limited to, guardrails, manhole covers, electric transmission and distribution equipment, including transformers, grounding straps, wires or poles, historical markers, street signs, traffic signs, sewer grates, or any rail, switch component, spike, angle bar, tie plate, or bolt of the type used in constructing railroad track;
|
| (3) cemetery plaques or ornaments; or
(4) any catalytic converter or its contents not
| | attached to a motor vehicle at the time of the transaction unless the seller is licensed as an automotive parts recycler or scrap processor.
|
| (b) (Blank).
(Source: P.A. 102-906, eff. 5-27-22; 103-677, eff. 1-1-25.)
|
815 ILCS 325/4.2 (815 ILCS 325/4.2) Sec. 4.2. Purchases of HVAC recyclable metal. A recyclable metal dealer shall not pay cash in payment for any air conditioner evaporator coil or condenser having a value of $100 or more. Payment for these materials must be made as follows: (1) by check or money order; (2) the payee on the check or money order shall be | | the same person as the seller who conducted the transaction;
|
| (3) if the seller is a business, then the recyclable
| | metal dealer shall make the check or money order payable to the company, and not to any individual employee or agent of the company.
|
|
(Source: P.A. 97-923, eff. 1-1-13.)
|
815 ILCS 325/4.3 (815 ILCS 325/4.3) Sec. 4.3. Purchases of copper. A recyclable metal dealer shall not pay cash in payment for any copper, including copper tubing or wiring, having a value of $100 or more. Payment for these materials must be made as follows: (1) by check or money order; (2) the payee on the check or money order shall be | | the same person as the seller who conducted the transaction;
|
| (3) if the seller is a business, then the recyclable
| | metal dealer shall make the check or money order payable to the company, and not to any individual employee or agent of the company.
|
|
(Source: P.A. 97-923, eff. 1-1-13.)
|
815 ILCS 325/4.4 (815 ILCS 325/4.4) (Text of Section before amendment by P.A. 103-677) Sec. 4.4. Purchase of a catalytic converter or its contents. A recyclable metal dealer shall not pay cash in payment for any catalytic converter or its contents having a value of $100 or more.
(Source: P.A. 102-906, eff. 5-27-22.) (Text of Section after amendment by P.A. 103-677) Sec. 4.4. Purchase of a catalytic converter or its contents. (a) It is unlawful for any person to purchase or otherwise acquire a used, detached catalytic converter or any nonferrous part thereof unless all of the following apply: (1) the person is a licensed recyclable metal dealer; (2) the sale or purchase occurs at the fixed business | | address of a licensed recyclable metal dealer that is a party to the transaction; and
|
| (3) the purchaser has maintained the information
| | required under Section 3 of the Recyclable Metal Purchase Registration Law.
|
| (b) A recyclable metal dealer shall not pay cash in payment for any catalytic converter or its contents having a value of $100 or more.
(Source: P.A. 102-906, eff. 5-27-22; 103-677, eff. 1-1-25.)
|
815 ILCS 325/4.5 (815 ILCS 325/4.5) Sec. 4.5. Purchase of beer kegs by recyclable metal dealers. (a) A recyclable metal dealer may not purchase metal beer kegs from any person other than the beer manufacturer whose identity is printed, stamped, attached, or otherwise displayed on the beer keg, or from the manufacturer's authorized representative. (b) The purchaser shall obtain a proof of ownership record from a person selling the beer keg, including any person selling a beer keg with an indicia of ownership that is obliterated, unreadable, or missing, and shall also verify the seller's identity by a driver's license or other government-issued photo identification. The proof of ownership record shall include all of the following information: (1) The name, address, telephone number, and | | signature of the seller or the seller's authorized representative.
|
| (2) The name and address of the buyer, or consignee
| | (3) A description of the beer keg, including its
| | capacity and any indicia of ownership or other distinguishing marks appearing on the exterior surface.
|
| (4) The date of transaction.
(c) The information required to be collected by this Section shall be kept for one year from the date of purchase or delivery, whichever is later.
(Source: P.A. 95-979, eff. 1-2-09.)
|
815 ILCS 325/4.6 (815 ILCS 325/4.6) Sec. 4.6. Lost or stolen metals. If a recyclable metal dealer suspects property in his or her possession to be lost or stolen, then he or she shall immediately notify the local law enforcement agency having jurisdiction and provide the law enforcement agency with the seller's information.
(Source: P.A. 97-923, eff. 1-1-13.) |
815 ILCS 325/5
(815 ILCS 325/5) (from Ch. 121 1/2, par. 325)
Sec. 5. Exemptions. The provisions of Sections 3, 4.2, and 4.3 of this Act do not apply to
electrical contractors, to agencies or instrumentalities of the State of
Illinois or of the United States, to units of local government, their agents or representatives, that have contracted with the recyclable metal dealer in the disposal of its metal street signs, to common carriers or to purchases from
persons, firms or corporations regularly engaged in the business of
manufacturing recyclable metal, the business of selling recyclable metal at retail or
wholesale, in the business of razing, demolishing, destroying or removing
buildings, to the purchase of one recyclable metal dealer from another or the
purchase from persons, firms or corporations engaged in either the
generation, transmission or distribution of electric energy or in
telephone, telegraph and other communications if such common carriers,
persons, firms or corporations at the time of the purchase provide the recyclable metal
dealer with a bill of sale or other written evidence of title to the recyclable metal.
(Source: P.A. 96-507, eff. 8-14-09; 97-923, eff. 1-1-13.)
|
815 ILCS 325/6
(815 ILCS 325/6)
Sec. 6. (Repealed).
(Source: P.A. 94-181, eff. 1-1-06. Repealed by P.A. 98-692, eff. 7-1-14.)
|
815 ILCS 325/6.5 (815 ILCS 325/6.5) Sec. 6.5. Recyclable Metal Theft Task Force. (a) The Recyclable Metal Theft Task Force is created within the Office of the Secretary of State. The Office of the Secretary of State shall provide administrative support for the Task Force. The Task Force shall consist of the members designated in subsections (b) and (c). (b) Members of the Task Force representing the State shall be appointed as follows: (1) Two members of the Senate appointed one each by | | the President of the Senate and by the Minority Leader of the Senate;
|
| (2) Two members of the House of Representatives
| | appointed one each by the Speaker of the House of Representatives and by the Minority Leader of the House of Representatives;
|
| (3) One member representing the Office of the
| | Secretary of State appointed by the Secretary of State; and
|
| (4) Two members representing the Illinois State
| | Police appointed by the Director of the Illinois State Police, one of whom must represent the State Police Academy.
|
| (c) The members appointed under subsection (b) shall select from their membership a chairperson. The chairperson shall appoint the public members of the Task Force as follows:
(1) One member representing municipalities in this
| | State with consideration given to persons recommended by an organization representing municipalities in this State;
|
| (2) Five chiefs of police from various geographical
| | areas of the State with consideration given to persons recommended by an organization representing chiefs of police in this State;
|
| (3) One representative of a public utility
| | headquartered in Illinois;
|
| (4) One representative of recyclable metal dealers in
| | (5) One representative of scrap metal suppliers in
| | (6) One representative of insurance companies
| | offering homeowners insurance in this State;
|
| (7) One representative of rural electric cooperatives
| | (8) One representative of a local exchange carrier
| | doing business in Illinois;
|
| (9) One representative of automotive recyclers in
| | (10) One representative of fleet operators in this
| | (d) The Task Force shall endeavor to establish a collaborative effort to combat recyclable metal theft throughout the State and assist in developing regional task forces, as determined necessary, to combat recyclable metal theft. The Task Force shall consider and develop long-term solutions, both legislative and enforcement-driven, for the rising problem of recyclable metal thefts in this State.
(e) Each year, the Task Force shall review the effectiveness of its efforts in deterring and investigating the problem of recyclable metal theft and in assisting in the prosecution of persons engaged in recyclable metal theft. The Task Force shall by October 31 of each year report its findings and recommendations to the General Assembly and the Governor.
(Source: P.A. 102-538, eff. 8-20-21; 102-906, eff. 5-27-22.)
|
815 ILCS 325/7
(815 ILCS 325/7) (from Ch. 121 1/2, par. 327)
Sec. 7. Inapplicability. This Act shall not apply in any municipality that provides for the
registration of recyclable metal purchased by resolution, ordinance or regulation that
substantially complies with the substantive provisions of this Act or
any rule or regulation hereunder with the exception of the penalty provisions. The fact of such nonapplication shall be
evidenced by a certificate of exemption issued by the Department of State
Police or such department as may succeed to its functions,
if it finds
that a municipal resolution, ordinance, or regulation meeting such
requirements is being enforced. The certificate of exemption shall be
available for inspection in the office of the municipal clerk. This Act
does not apply in municipalities with populations of 1,000,000 or over.
(Source: P.A. 95-979, eff. 1-2-09.)
|
815 ILCS 325/8
(815 ILCS 325/8) (from Ch. 121 1/2, par. 328)
Sec. 8. Penalty. Any recyclable metal dealer or other person who knowingly fails to comply with this Act is guilty
of a Class A misdemeanor for the first offense, and a Class 4 felony for the second or subsequent offense. Each day that any recyclable metal dealer so fails to
comply shall constitute a separate offense. Any metal obtained not in accordance with this Act is subject to immediate forfeiture.
(Source: P.A. 102-906, eff. 5-27-22.)
|
815 ILCS 325/9 (815 ILCS 325/9) Sec. 9. Injunctions. The Illinois Attorney General or the State's Attorney for the county in which the recyclable metal dealer is located may initiate an appropriate action in the circuit court of the county in which a recyclable metal dealer is located to prevent the unlawful operation of a recyclable metal dealer, or to restrain, correct, or abate a violation of this Act, or to prevent any illegal act or conduct by the recyclable metal dealer.
(Source: P.A. 95-979, eff. 1-2-09.) |
|
|
|
|
