(225 ILCS 470/30) (from Ch. 147, par. 130)
Sec. 30. National Institute of Standards and Technology requirements and
specifications. Each type of weight and measure or weighing and
measuring
device manufactured, offered, or exposed for sale or sold or given away for
the use in trade or commerce, or used in trade and commerce in this State,
shall conform with the requirements and specifications in the National
Institute of Standards and Technology Handbook 44, 105-1, 105-2, 105-3,
105-4, or 105-8 and any
of their revisions or supplements. Such weights and measures or weighing and measuring devices used for commercial or law enforcement purposes must have a Certificate of
Conformance, unless such devices were certified by the Department or the city sealer on or before July 1, 2012. This Section applies to all such devices, including repaired devices and devices removed from service and installed at a different location in this State. Pending the
issuance of a Certificate of Conformance, the Department may permit such
weight and measure or weighing and measuring device to be used,
provided
it
meets the specifications and tolerances for that particular weight and
measure or weighing and measuring device as set forth in the National
Institute of Standards and Technology
Handbook 44, 105-1, 105-2, 105-3, 105-4, or 105-8.
(Source: P.A. 98-342, eff. 8-13-13.)
|