(225 ILCS 325/4) (from Ch. 111, par. 5204)
    (Section scheduled to be repealed on January 1, 2030)
    Sec. 4. Definitions. As used in this Act:
    (a) "Address of record" means the designated address recorded by the Department in the applicant's or licensee's application file or license file maintained by the Department's licensure maintenance unit.
    (a-5) "Approved engineering curriculum" means an engineering curriculum or program of 4 academic years or more that meets the standards established by the rules of the Department.
    (b) "Board" means the State Board of Professional Engineers of the Department.
    (c) "Department" means the Department of Financial and Professional Regulation.
    (d) "Design professional" means an architect, structural engineer, or professional engineer practicing in conformance with the Illinois Architecture Practice Act of 1989, the Structural Engineering Practice Act of 1989 or the Professional Engineering Practice Act of 1989.
    (e) (Blank).
    (f) "Direct supervision/responsible charge" means work prepared under the control of a licensed professional engineer or that work as to which that professional engineer has detailed professional knowledge. The Department may further define this term by rule.
    (f-5) "Email address of record" means the designated email address of record by the Department in the applicant's application file or the licensee's license file as maintained by the Department's licensure maintenance unit.
    (g) "Engineering college" means a school, college, university, department of a university or other educational institution, reputable and in good standing in accordance with rules prescribed by the Department, and which grants baccalaureate degrees in engineering.
    (h) "Engineering system or facility" means a system or facility whose design is based upon the application of the principles of science for the purpose of modification of natural states of being.
    (i) "Engineer intern" means a person who is a candidate for licensure as a professional engineer and who has been enrolled as an engineer intern.
    (j) "Enrollment" means an action by the Department to record those individuals who have met the Department's requirements for an engineer intern.
    (k) "License" means an official document issued by the Department to an individual, a corporation, a partnership, a professional service corporation, a limited liability company, or a sole proprietorship, signifying authority to practice.
    (l) "Negligence in the practice of professional engineering" means the failure to exercise that degree of reasonable professional skill, judgment and diligence normally rendered by professional engineers in the practice of professional engineering.
    (m) "Professional engineer" means a person licensed under the laws of the State of Illinois to practice professional engineering.
    (n) "Professional engineering" means the application of science to the design of engineering systems and facilities using the knowledge, skills, ability and professional judgment developed through professional engineering education, training and experience.
    (o) "Professional engineering practice" means the consultation on, conception, investigation, evaluation, planning, and design of, and selection of materials to be used in, administration of construction contracts for, or site observation of, an engineering system or facility, where such consultation, conception, investigation, evaluation, planning, design, selection, administration, or observation requires extensive knowledge of engineering laws, formulae, materials, practice, and construction methods. A person shall be construed to practice or offer to practice professional engineering, within the meaning and intent of this Act, who practices, or who, by verbal claim, sign, advertisement, letterhead, card, or any other way, is represented to be a professional engineer, or through the use of the initials "P.E." or the title "engineer" or any of its derivations or some other title implies licensure as a professional engineer, or holds himself or herself out as able to perform any service which is recognized as professional engineering practice.
    Examples of the practice of professional engineering include, but are not limited to, transportation facilities and publicly owned utilities for a region or community, railroads, railways, highways, subways, canals, harbors, river improvements; land development; stormwater detention, retention, and conveyance, excluding structures defined under Section 5 of the Structural Engineering Practice Act of 1989; irrigation works; aircraft and airports; traffic engineering; waterworks, piping systems, sewers, sewage disposal works, storm sewer, sanitary sewer and water system modeling; plants for the generation of power; devices for the utilization of power; boilers; refrigeration plants, air conditioning systems and plants; heating systems and plants; plants for the transmission or distribution of power; electrical plants which produce, transmit, distribute, or utilize electrical energy; works for the extraction of minerals from the earth; plants for the refining, alloying or treating of metals; chemical works and industrial plants involving the use of chemicals and chemical processes; plants for the production, conversion, or utilization of nuclear, chemical, or radiant energy; forensic engineering, geotechnical engineering including, subsurface investigations; soil and rock classification, geology and geohydrology, incidental to the practice of professional engineering; geohydrological investigations, migration pathway analysis (including evaluation of building and site elements), soil and groundwater management zone analysis and design; energy analysis, environmental risk assessments, corrective action plans, design, remediation, protection plans and systems, hazardous waste mitigation and control, and environmental control or remediation systems; recognition, measurement, evaluation and control of environmental systems and emissions; control systems, evaluation and design of engineered barriers, excluding structures defined under Section 5 of the Structural Engineering Practice Act of 1989; modeling of pollutants in water, soil, and air; engineering surveys of sites, facilities, and topography specific to a design project, not including land boundary establishment; automated building management systems; control or remediation systems; computer controlled or integrated systems; automatic fire notification and suppression systems; investigation and assessment of indoor air inhalation exposures and design of abatement and remediation systems; or the provision of professional engineering site observation of the construction of works and engineering systems. In the performance of any of the foregoing functions, a licensee shall adhere to the standards of professional conduct enumerated in 68 Ill. Adm. Code 1380.300. Nothing contained in this Section imposes upon a person licensed under this Act the responsibility for the performance of any of the foregoing functions unless such person specifically contracts to provide it. Nothing in this Section shall preclude an employee from acting under the direct supervision or responsible charge of a licensed professional engineer.
    (p) "Project representative" means the professional engineer's representative at the project site who assists in the administration of the construction contract.
    (q) "Registered" means the same as "licensed" for purposes of this Act.
    (r) "Related science curriculum" means a 4-year program of study, the satisfactory completion of which results in a Bachelor of Science degree, and which contains courses from such areas as life, earth, engineering and computer sciences, including, but not limited to, physics and chemistry. In the study of these sciences, the objective is to acquire fundamental knowledge about the nature of its phenomena, including quantitative expression, appropriate to particular fields of engineering.
    (s) "Rules" means the rules adopted pursuant to this Act.
    (t) "Seal" means the seal in compliance with Section 14 of this Act.
    (t-5) "Secretary" means the Secretary of Financial and Professional Regulation.
    (u) "Site observation" means visitation of the construction site for the purpose of reviewing, as available, the quality and conformance of the work to the technical submissions as they relate to design.
    (v) "Support design professional" means a professional engineer practicing in conformance with the Professional Engineering Practice Act of 1989, who provides services to the design professional who has contract responsibility.
(Source: P.A. 101-310, eff. 8-9-19.)