|
Rep. Karen May
Filed: 3/16/2005
|
|
09400HB1628ham002 |
|
LRB094 02848 RSP 43890 a |
|
|
1 |
| AMENDMENT TO HOUSE BILL 1628
|
2 |
| AMENDMENT NO. ______. Amend House Bill 1628, AS AMENDED, |
3 |
| with reference to page and line numbers of House Amendment 1, |
4 |
| on page 7, immediately after line 30, by inserting the |
5 |
| following:
|
6 |
| "Section 40. Phase-out of mercury-added vehicle |
7 |
| components. To prevent emissions or other releases of mercury |
8 |
| from vehicles, effective 2 vehicle model years from the |
9 |
| effective date of this Act, no mercury-added component shall be |
10 |
| included as part of a new vehicle offered for sale in Illinois. |
11 |
| Section 45. Exemptions. |
12 |
| (a) A mercury-added component that is necessary in a |
13 |
| vehicle to ensure compliance with federal or State health and |
14 |
| safety requirements, or for purposes of national security, |
15 |
| shall be exempt from the requirements of Section 40 of this |
16 |
| Act, provided that: |
17 |
| (1) the manufacturer applies or reapplies for an |
18 |
| exemption to the Agency; and |
19 |
| (2) the application is in writing, in a form acceptable |
20 |
| to the Agency, and the application states the need for an |
21 |
| exemption and the legal basis for an exemption. |
22 |
| (A) The application must include documentation |
23 |
| that there is "no technically feasible alternative" to |
24 |
| the use of mercury in the component and that there is |
|
|
|
09400HB1628ham002 |
- 2 - |
LRB094 02848 RSP 43890 a |
|
|
1 |
| no comparable mercury-free component available at |
2 |
| reasonable cost to address the health or safety |
3 |
| requirement or issue of national security. "No |
4 |
| technically feasible alternative" does not include the |
5 |
| use of mercury for the purpose of marketing. |
6 |
| (B) The applicant must include a description of how |
7 |
| the manufacturer will fund the system for the proper |
8 |
| removal, collection, and recovery of the mercury-added |
9 |
| component while the vehicle is in commerce and at the |
10 |
| end of the vehicle's useful life. |
11 |
| (C) Subject to the issuance of public notice and |
12 |
| solicitations of public comment, the Agency shall |
13 |
| accept or reject the application for exemption within |
14 |
| 90 days. |
15 |
| (b) An exemption application may be submitted to the |
16 |
| Agency, subject to public notice and comment, for safety |
17 |
| components not required by federal or State law. An exemption |
18 |
| may only be granted upon clear demonstration that: |
19 |
| (1) such components will substantially increase public |
20 |
| health and safety, taking into account any impacts the |
21 |
| components may have on overall on-road public safety and |
22 |
| the life-cycle impacts of the mercury use; and |
23 |
| (2) there is no technically feasible alternative to the |
24 |
| use of mercury in the component. |
25 |
| (c) An exemption granted under this Section by the Agency |
26 |
| shall be valid for a period not to exceed 2 years. |
27 |
| (d) Exemptions granted under this Section shall be |
28 |
| renewable for periods not to exceed 2 years. |
29 |
| (e) If granted an exemption, any vehicle that may contain a |
30 |
| mercury-added component shall be labeled by the manufacturer in |
31 |
| a manner to clearly inform purchasers that mercury is present |
32 |
| in the vehicle and that the component may not be disposed of or |
33 |
| placed in a waste stream destined for disposal until the |
34 |
| mercury is removed, reused, recovered, properly disposed of as |
|
|
|
09400HB1628ham002 |
- 3 - |
LRB094 02848 RSP 43890 a |
|
|
1 |
| a hazardous waste, or otherwise managed to ensure that the |
2 |
| mercury does not become mixed with other solid waste. The label |
3 |
| shall identify the component with sufficient detail so that it |
4 |
| may be readily located for removal. The label shall be placed |
5 |
| on the doorpost of each vehicle that may contain a |
6 |
| mercury-added component and be constructed of materials that |
7 |
| are sufficiently durable to remain legible for the useful life |
8 |
| of the vehicle. |
9 |
| Section 50. Design for recycling. Manufacturers, when |
10 |
| designing vehicles and their components, shall: |
11 |
| (1) To the maximum extent practicable, eliminate toxic |
12 |
| substances from their vehicles. |
13 |
| (2) Insure that their vehicles are designed to be |
14 |
| recycled in a safe, cost effective, and environmentally |
15 |
| sound manner, using existing technologies, entities, and |
16 |
| infrastructures. |
17 |
| (3) Where a vehicle is found to present environmental |
18 |
| risks that make it uneconomical to recycle, make |
19 |
| appropriate design or manufacturing changes.".
|