SB3550enr 100TH GENERAL ASSEMBLY

SB3550 Enrolled LRB100 19769 MJP 35044 b

AN ACT concerning safety.

Be it enacted by the People of the State of Illinois, represented in the General Assembly:

Section 5. The Consumer Electronics Recycling Act is amended by changing Sections 1-10 and 1-25 as follows:

(415 ILCS 151/1-10)

(Section scheduled to be repealed on December 31, 2026)

Sec. 1-10. Manufacturer e-waste program.

(a) For program year 2019 and each program year thereafter, each manufacturer shall, individually or as part of a manufacturer clearinghouse, provide a manufacturer e-waste program to transport and subsequently recycle, in accordance with the requirements of this Act, residential CEDs collected at, and prepared for transport from, the program collection sites and one-day collection events included in the program during the program year.

(b) Each manufacturer e-waste program must include, at a minimum, the following:

(1) satisfaction of the convenience standard described in Section 1-15 of this Act;

(2) instructions for designated county recycling coordinators and municipal joint action agencies to annually file notice to participate in the program;

(3) transportation and subsequent recycling of the residential CEDs collected at, and prepared for transport from, the program collection sites and one-day collection events included in the program during the program year; and

(4) submission of a report to the Agency, by March 1, 2020, and each March 1 thereafter, which includes:

(A) the total weight of all residential CEDs transported from program collection sites and one-day collection events throughout the State during the preceding program year by CED category;

(B) the total weight of residential CEDs transported from all program collection sites and one-day collection events in each county in the State during the preceding program year by CED category; and

(C) the total weight of residential CEDs transported from all program collection sites and one-day collection events in each county in the State during that preceding program year and that was recycled.

(c) Each manufacturer e-waste program shall make the instructions required under paragraph (2) of subsection (b) available on its website by December 1, 2017, and the program shall provide to the Agency a hyperlink to the website for posting on the Agency's website.

(d) Nothing in this Act shall prevent a manufacturer from accepting, through a manufacturer e-waste program, residential CEDs collected through a curbside or drop-off collection program that is operated pursuant to a residential franchise collection an agreement authorized by Section 11-19-1 of the Illinois Municipal Code or Section 5-1048 of the Counties Code between a third party and a unit of local government located within a county or municipal joint action agency that has elected to participate in a manufacturer e-waste program.

(e) A collection program operated in accordance with this Section shall:

(1) meet the collector responsibilities under subsections (a), (a-5), (d), (e), and (g) under Section 1-45 and require certification on the bill of lading or similar manifest from the unit of local government, the third party, and the county or municipal joint action agency that elected to participate in the manufacturer e-waste program that the CEDs were collected, to the best of their knowledge, from residential consumers in the State of Illinois;

(2) comply with the audit provisions under subsection (g) of Section 1-30;

(3) locate any drop-off location where CEDs are collected on property owned by a unit of local government; and

(4) have signage at any drop-off location indicating only residential CEDs are accepted for recycling.

Manufacturers of CEDs are not financially responsible for transporting and consolidating CEDs collected from a collection program's drop-off location. Any drop-off location used in 2019 must have been identified by the county or municipal joint action agency in the written notice of election to participate in the manufacturer e-waste program in accordance with Section 1-20 by March 1, 2018. Any drop-off location operating in 2020 or in subsequent years must be identified by the county or municipal joint action agency in the annual written notice of election to participate in a manufacturer e-waste program in accordance with Section 1-20 to be eligible for the subsequent program year.

(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)

(415 ILCS 151/1-25)

(Section scheduled to be repealed on December 31, 2026)

Sec. 1-25. Manufacturer e-waste program plans.

(a) By September July 1, 2018 for program year 2019, and by July 1 of each year thereafter for the upcoming program year, beginning with program year 2019, each manufacturer shall, individually or as a manufacturer clearinghouse, submit to the Agency a manufacturer e-waste program plan, which includes, at a minimum, the following:

(1) the contact information for the individual who will serve as the point of contact for the manufacturer e-waste program;

(2) the identity of each county that has elected to participate in the manufacturer e-waste program during the program year;

(3) for each county, the location of each program collection site and one-day collection event included in the manufacturer e-waste program for the program year;

(4) the collector operating each program collection site and one-day collection event included in the manufacturer e-waste program for the program year;

(5) the recyclers that manufacturers plan to use during the program year to transport and subsequently recycle residential CEDs under the program, with the updated list of recyclers to be provided to the Agency no later than December 1 preceding each program year; and

(6) an explanation of any deviation by the program from the standard program collection site distribution set forth in subsection (a) of Section 1-15 of this Act for the program year, along with copies of all written agreements made pursuant to paragraphs (1) or (2) of subsection (b) of Section 1-15 for the program year.

(b) Within 60 days after receiving a manufacturer e-waste program plan, the Agency shall review the plan and approve the plan or disapprove the plan.

(1) If the Agency determines that the program collection sites and one-day collection events specified in the plan will satisfy the convenience standard set forth in Section 1-15 of this Act, then the Agency shall approve the manufacturer e-waste program plan and provide written notification of the approval to the individual who serves as the point of contact for the manufacturer. The Agency shall make the approved plan available on the Agency's website.

(2) If the Agency determines the plan will not satisfy the convenience standard set forth in Section 1-15 of this Act, then the Agency shall disapprove the manufacturer e-waste program plan and provide written notification of the disapproval and the reasons for the disapproval to the individual who serves as the point of contact for the manufacturer. Within 30 days after the date of disapproval, the manufacturer shall submit a revised manufacturer e-waste program plan that addresses the deficiencies noted in the Agency's disapproval.

(c) Manufacturers shall assume financial responsibility for carrying out their e-waste program plans, including, but not limited to, financial responsibility for providing the packaging materials necessary to prepare shipments of collected residential CEDs in compliance with subsection (e) of Section 1-45, as well as financial responsibility for bulk transportation and recycling of collected residential CEDs.

(Source: P.A. 100-362, eff. 8-25-17; 100-433, eff. 8-25-17.)